Your Cart


24 Volt DC Chain actuator with a max. push/pull force of 650N.
Suitable on windows and vents in SHEV installations and for daily ventilation purposes. The housing is made of extruded aluminium and anodised in EV1/E6.
Because of the compact and powerful design very widely applicable.

Very silent and powerfull chain actuator with "Soft-close" and "Soft-start" function.
The Simon-Link connection makes it possible to fine-tune stroke and push/pull power on site. (After installation)
Also equipped with "F-contact" for feedback contact and built-in electronic overload cut-off.

The bracket for connecting the chain to the frame or sash profile AND the mounting brackets for the housing are sold separately. (Exact model depending on mounting method). The different brackets can be found below under "Related Products".

The EA-K-65 actuator is also available with a "tandem" function. Through this tandem function up to 4 actuators can be connected in parallel

Field of application(N)SHEV | Natural Ventilation
Electric features
Voltage24V DC
Current Nominal (A.)1.6
Cable3x 0.75 mm2 / L= 2 mtr.
Mechanical features
Stroke (mm.)300
Stroke adjustableYes, continuously.(with software)
Push force (N.)650
Pull force (N.)650
Speed (mm/sec.)11.0
Max. opening/closing time (Sec.)27
Temperature Resistance300° C for 30 minutes (according to DIN EN 12101-2)
Dimensions and Weights
Dimension (L x W x H)430x50x41 mm.
Nett weight (kg.)2.4
Certifications / Tests
Certifications & DeclarationsEN 12101-2
Limit stopElectronic | Integrated
Overload cutt-offElectronic (load dependent) | Integrated
Protection ClassIP32
MaterialHousing: Aluminium
Customised Parametersfill in

Related Products

Bracketset K-K50-A is used for pivotable mounting the type EA-K-50 chain actuators on bottom-hung wi..
€ 29.00
Bracketset K-K50-K is used for pivotable mounting the type EA-K-50 chain actuators on bottom-hung wi..
€ 26.00
Supporting bracket K-K50-SKI is used for connecting the chain of a chain actuator (type EA-K-50/65) ..
€ 32.00
Bracket K-K50-OK is used for connecting the chain from EA(230)-K-30, EA(230)-K-50 and EA-K-65 type c..
€ 12.00
Bracket K-K50-AKI is used for connecting the chain of a EA-K-50/65 type chain actuator on bottom hin..
€ 26.00
Bracket K-K-OK-SK is used as a replacement for the standard K-K50-OK if the mounting situation only ..
€ 15.00
Bracketset K-K50-FLEX is used for pivot-mounting EA(230)-K-50 chain actuators on bottom hinged windo..
€ 41.00