Your Cart


The supplementary electric locking point PA-ZVE-UNI increases the clamping force on high and wide windows and provides extra mechanical locking.
It can be combined with any electromechanical actuator that provides an F-contact or a potential-free contact in the CLOSED position.

The additional mounting plate has self-adhesive dots so that the central locking unit can be pre-positioned on the window without any tools. The mounting plate can be used for inward or outward opening windows.

Equipped with locking sequence controller:
When the sash is opened automatically the PA-ZVE-UNI will be unlocked (takes about 15 sec.), then the connected actuator(s) will open the vent.
When closing the sash, the actuator(s) will provide a signal to the PA-ZVE-UNI when de sash is closed. The PA-ZVE-UNI will lock the sash again.
It is possible to connect more actuators to one PA-ZVE-UNI (total max. 6A. current).

The PA-ZV-UNI is equipped with the SICO-PLUG connector for on-surface installation and cabeling, but has no SICO LINK software interface (no parameters can be set).

Electric features
Voltage24V DC
Current Nominal (A.)0.095
CableOrder separately (6x 0.75 mm² met SICO-Plug)
Cable connectionSICO-Plug
Switch on durationS2 30%
Mechanical features
Holding force (N.)750
Locking pressure (N.)200
Max. opening/closing time (Sec.)< 15
Sound level (1 mtr. distance)< 70 dB
Temperature Range0 °C tot +75 °C
Protection ClassIP40
Finishanodised EV1/F1
Warranty3 years

Related Products

Set of 5 pieces SICO plugs. Used for all Simon-PROtec drives and locking actuators in PA version.Plu..
€ 65.00
Set of 5 pieces SICO plugs. Used for all Simon-PROtec drives and locking actuators in PA version.Att..
€ 40.00