FOLDING ARM ACTUATOR PA-KL²-T-50
The 24V DC folding arm door opener PA-KL²-T-50 is a further development on base of the folding arm actuator PA-KL². This actuator is used on inward- and outwards opening, self closing doors. Particularly suitable for doors, which serve as air inlet for (N-)SHEV installations.
The housing/body is fixed mounted to the doorfame. It moves only the arm, which pushes the door open with a roller mechanism that is not fixed to the door. The manual opening of the door is therefore not limited. The opening speed is approximately 3º/sec. Maximum opening angle depends on the exact mounting position and is limited to 122º.
Fixing with mounting plate or mounting angle on hinge-hinge side or non-hinge-side possible.
The required mounting plate or angle needs to be ordered seperately.
|Field of application||(N)SHEV | Natural Ventilation|
|Current Nominal (A.)||1.3|
|Cable||Order separately (6x 0.75 mm² met SICO-Plug)|
|Switch on duration||S2 30%|
|Push force (N.)||500|
|Max. opening angle (degrees)||122|
|Sound level (1 mtr. distance)||< 70 dB|
|Temperature Range||0 °C to +75 °C|
|Dimensions and Weights|
|Dimension (L x W x H)||474x58x118 mm.|
|Overload cutt-off||Electronic (load dependent) | Integrated|
|Material||Body: Aluminium / Arm: RVS / Internal mech.: Steel|
|Remark(s)||Equiped with single arm|