Articulated gate opener ART300-124EV
- Availability: In Stock
- Product code: N1066Z260
- Weight: 18.00kg
- Ordering Unit: set
- Productcode manufacturer: AA250EVK-01
The Liftmaster AA250EVK-01 swing gate opener with articulated arm is suitable for automating both inward and outward opening double swing gates that are placed between two columns. Can be used on door leaf widths up to 2.5 meter per wing.
Maximum opening angle is 120 degrees. Note: This depends on the exact positioning of the openers (see documentation). The maximum opening angle need to be limited with an end-stop. It takes about 13 seconds to open the gate for 90 degrees.
The
control box is supplied with 230V AC. The openers themselves operate on
24V DC and have built-in overload protection and thermal protection.
Time delay for the automatic closing of the gate can be easily set.
The
gate is normally operated via the supplied remote control. It is also
possible to operate the gate via your smartphone with the MyQ app. You
do need the optional MyQ Gateway for this.
The AA250EVK-01 comes complete with:
- 2 Openers (actuators, type AA250EVK)
- 1 Control box with integrated IR radio module
- 2 Remote controls 4-channel 686Mhz (TX4EVF)
- 2 IR Photocells 772E
- Actuator connection cables
- Mounting brackets
- Installation manual
| Electric features | |
| Voltage supply | 230V AC |
| Switch on duration | 100% (max. 30 cycles a day) |
| Backup Battery | Optional |
| Connections | photocells | flashing light | battery | antenna | solar panel manual switches | safety edges |
| Mechanical features | |
| Max. opening/closing time (Sec.) | 13 (90 degrees) |
| Max. opening angle (degrees) | 120 |
| Temperature Range | -20 °C to +55 °C |
| Safety/Protection | |
| Limit stop | Electronic | Photocells | Safety edge (optional) |
| Overload cutt-off | Electronic (load dependent) | Integrated |
| Protection Class | IP44 |
| General | |
| Warranty | 2 years |
