Articulated gate opener ART300-124EV
The Liftmaster ART300-124EV gate opener with articulated arm is suitable for automating both inward and outward opening double swing gates that are placed between two columns or that require a large opening angle (up to max. 130 degrees). The maximum opening angle should always be limited with end stops.
Applicable to sashes with the following maximum dimensions and weights:
Sash width 1,5 meter - max. 250 kg.
Sash width 2,0 meter - max. 200 kg.
Sash width 2,5 meter - max. 150 kg.
Maximum opening angle is 130 degrees. (Note: This depends on the exact positioning of the openers (see documentation). The maximum opening angle need to be limited with an end-stop.
It takes about 12 seconds to open the gate for 90 degrees.
The control box is supplied with 230V AC. The openers themselves operate on 24V DC and have built-in overload protection and thermal protection.
Time delay for the automatic closing of the gate can be easily set.
The gate is normally operated via the supplied remote control. It is also possible to operate the gate via your smartphone with the MyQ app. You do need the optional MyQ Gateway for this.
The ART300-124EV comes complete with:
- 2 Openers (actuators, type ART300-124)
- 1 Control box CB124EV with MyQ receiver module
- 2 Remote control TX4UNI (with rolling code for extra security)
- 2 IR Photocells 772E
- Actuator connection cables
- Mounting brackets
- Installation manual
|Voltage supply||230V AC|
|Switch on duration||100% (max. 50 cycles a day)|
|Connections||photocells | flashing light | battery | antenna | solar panel manual switches | safety edges|
|Max. opening/closing time (Sec.)||12 (90 degrees)|
|Max. opening angle (degrees)||130|
|Temperature Range||-20 °C to +55 °C|
|Limit stop||Electronic | Photocells | Safety edge (optional)|
|Overload cutt-off||Electronic (load dependent) | Integrated|