Articulated gate opener SW501
The EasyJack SW501 gate opener with articulated arm is suitable for automating both inward and outward opening double swing gates that are placed between two columns or that require a large opening angle (up to max. 130 degrees). The maximum opening angle should always be limited with end stops.
The maximum permissible width of one wing is 2.75 meters and a maximum weight of 275 kg.
The SW501 comes complete with:
- 2 Openers (actuators)
- 1 Control box
- 2 Bolt-on mounting brackets for mounting the actuators to the columns
- 2 Bolt-on mounting brackets for mounting the articulated arms to the gate
- 1 Remote Control
- 2 Photocells
- Actuator connection cables
- Allen key for emergency opening
- Installation manual
The maximum push/pull force can be adjusted by means of a potentiometer, so that it can be adjusted to the sash weight and any wind force. The opening and closing delay of the second sash is also adjustable from 2 to 10 seconds with a potentiometer.
The control box is supplied with 230V AC. The openers themselves operate on 12V DC and have a built-in resistance/overload protection. Automatic gate closing can be set from 10 seconds.
Optional you can connect a flashing warning light, back-up battery, safety-edge, external antenna, solar panel and electomagnetic lock to the control box.
A maximum of 39 remote controls can be connected to the control box.
Opening both sashes for 90 degrees takes about 10 seconds.
|Voltage supply||230V AC|
|Switch on duration||S2 20%|
|Connections||photocells | flashing light | battery | antenna | solar panel manual switches | safety edges|
|Max. opening/closing time (Sec.)||10 (90 degrees)|
|Max. opening angle (degrees)||130|
|Temperature Range||-20 °C to +65 °C|
|Limit stop||Electronic | Photocells | Safety edge (optional)|
|Overload cutt-off||Electronic (load dependent) | Integrated|