CHAIN ACTUATOR EA-K-65
24 Volt DC Chain actuator with a max. push/pull force of 650N.
Suitable on windows and vents in SHEV installations and for daily ventilation purposes. The housing is made of extruded aluminium and anodised in EV1/E6.
Because of the compact and powerful design very widely applicable.
Very silent and powerfull chain actuator with "Soft-close" and "Soft-start" function.
The Simon-Link connection makes it possible to fine-tune stroke and push/pull power on site. (After installation)
Also equipped with "F-contact" for feedback contact and built-in electronic overload cut-off.
Comes with bracket K-K50-OK (product code: J9942E001) for connecting the chain to the frame or sash profile.
Mounting brackets for the housing are sold separately. (Exact model depending on mounting method)
The EA-K-65 actuator is also available with a "tandem" function. Through this tandem function up to 4 actuators can be connected in parallel
|Field of application||(N)SHEV | Natural Ventilation|
|Current Nominal (A.)||1.6|
|Cable||3x 0.75 mm2 / L= 2 mtr.|
|Stroke adjustable||Yes, continuously.(with software)|
|Push force (N.)||650|
|Pull force (N.)||650|
|Max. opening/closing time (Sec.)||27|
|Temperature Resistance||300° C for 30 minutes (according to DIN EN 12101-2)|
|Dimensions and Weights|
|Dimension (L x W x H)||430x50x41 mm.|
|Nett weight (kg.)||2.4|
|Certifications / Tests|
|Certifications & Declarations||EN 12101-2|
|Limit stop||Electronic | Integrated|
|Overload cutt-off||Electronic (load dependent) | Integrated|
|Customised Parameters||fill in|