CHAIN ACTUATOR NANO DC
24 Volt DC Chain actuator, type NANO DC, with a fixed stroke of 200, 300, 400, 500, 600 or 800mm. Maximum push/pull force is 400N.
Suitable on windows and vents in (N-)SHEV installations and for daily ventilation purposes. Because of the very silent operation and compact extruded aluminium housing (24x35mm.) very widely applicable.
Standard equipped with a "Soft-close" function and built-in (limited) pinch protection function: As soon as the motor encounters extra resistance from an obstacle outside the soft-close zone, it will automatically open again to prevent trapping.Optionally available in a "SYNCHRO" version if 2 or more chain motors are mounted on 1 sash. Up to 4 chain motors can be connected synchronously. The chain acutators with "SYNCHRO" function are also available with an "F-contact" for a potential-free feedback signal in both OPEN and CLOSED position of the actuator.
The standard version is supplied including a connection cable of 1.5 mtr. For the SYNCHRO versions you need to order them separately.
The mounting brackets must be ordered separately. (Model depends on the situation / profile and application)
|Field of application||(N)SHEV | Natural Ventilation|
|Current Nominal (A.)||1.2|
|Cable||2x 0.75 mm2 / L= 1.5 mtr. | Synchro: without cable|
|Cable connection||Fixed cable | Plug connector (Synchro version)|
|Switch on duration||S2 30%|
|Stroke (mm.)||400 | 600 | 800 | 1000 | 1200|
|Push force (N.)||400 | 100|
|Pull force (N.)||400|
|Holding force (N.)||1900|
|Speed (mm/sec.)||4.0 - 14.0 (Load dependent)|
|Temperature Resistance||300° C for 30 minutes (according to DIN EN 12101-2)|
|Temperature Range||-5 °C to +70 °C|
|Dimensions and Weights|
|Dimension (L x W x H)||550/600/700/900x35x24 mm.|
|Nett weight (kg.)||1.20 to 2.4 *|
|Limit stop||Electronic | Integrated|
|Overload cutt-off||Electronic (load dependent) | Integrated|