ELECTRIC LOCKING POINT PA-ZVE-UNI
The supplementary electric locking point ZVE-UNI-A increases the clamping force on high and wide windows and provides extra mechanical locking.
It can be combined with any elektromechanical actuator that provides an F-contact or a potential-free contact in the end position CLOSED.
The additional mounting plate has self-adhesive dots so that the central locking unit can be pre-positioned on the window without any tools. The mounting plate can be used for inward or outward opening windows.
Equipped with locking sequence controller:
When the sash is opened automatically the PA-ZVE-UNI will be unlocked (takes about 15 sec.), then the connected actuator(s) will open the vent.
When closing the sash, the actuator(s) will provide a signal to the PA-ZVE-UNI when de vent is closed. ThePA-ZVE-UNI will lock the sash again.
It is possible to connect more actuators to one PA-ZVE-UNI (total max. 6A. current).
The PA-ZV-UNI is equipped with the SICO-PLUG connector for on-surface installation and cabeling, but has no SICO LINK software interface (no parameters can be set).
|Current Nominal (A.)||0.095|
|Cable||Order separately (6x 0.75 mm² met SICO-Plug)|
|Switch on duration||S2 30%|
|Holding force (N.)||750|
|Locking pressure (N.)||200|
|Max. opening/closing time (Sec.)||< 15|
|Sound level (1 mtr. distance)||< 70 dB|
|Temperature Range||0 °C tot +75 °C|