The E-LOCK is an electromechanical drive by which the mechanical fitting in windows can be automatically (un-)locked. The E-Lock is built concealed into the frame. Ideal if windows have (mechanical) locking cams for extra security and/or for extra pressure on the sash for better wind and watertightness. Depending on the version selected, the E-LOCK can be combined with different window drives:
- E-Lock standard : The position of the window is adjusted by means of a microswitch or reed-contact passed on to the E-Lock after which it can lock / unlock the window.
- E-Lock F-Contact : The E-lock receives the position of the connected window drive(s) via a Feedback signal (F-Contact) (The coupled window drive(s) must therefore have a version WITH F-contact in both open and closed position!)
- E-Lock BMSline : The E-lock receives the info about the position of the window from the connected BMSline drive (via MODBUS), after which it can lock / unlock the window
The stroke is adjustable with DIP-Switches (19 or 38 mm.)
Equipped with locking sequence controller:
When the sash is opened automatically the E-Lock will be unlocked (takes max. 24 sec. by a stroke of 38mm.), then the connected actuator(s) will open the sash.
When closing the sash, the actuator(s) will provide a signal (by F-Signal / Modbus or reed-contact) to the E-Lock when de sash is closed. The E-Lock will lock the sash again.
It is possible to connect more actuators to one E-Lock (total max. 5A. current).
|Current Nominal (A.)||0.3|
|Switch on duration||S2 50%|
|Push force (N.)||600|
|Pull force (N.)||600|
|Holding force (N.)|
|Speed (mm/sec.)||> 1.6|
|Temperature Range||-5 °C to +65 °C|
|Overload cutt-off||Electronic (load dependent) | Integrated|