FITTING STAY DRIVE SBS 500-S
Fitting Stay Drive SBS-500-S. Max. stroke 500mm. Max. Open/Close force 150N. 24Volt DC.
For use on sashes for daily ventilation and/or smoke- and heat exhaust (SHE). Applicable to almost every type of sash.
The biggest advantages of this drive are the narrow construction and the large opening widths (up to 90°) that can be realized.
The electric fitting stay SBS comes standard with the sash bracket. Additional fitting materials (depending on the application) must be ordered sperately. You can find the various accessories by the related products (see below) or in the documentation (see the downloads tab). Of course you can also contact us for advice.
If you want to use two SBS Stay drives on one sash and/or use an additional electromechanical locking device (ZV/R from Hautau) for extra closing force, you always have to order the FTA3.x sequence- tandem controller as extra.
|Field of application||(N)SHEV | Natural Ventilation|
|Window/Sash type||Bottom hinged | Top hung | Side hung, outward opening | Side hung, inward opening|
|Current Nominal (A.)||0.9|
|Peak current (A.)||3.7|
|Cable connection||4-pin plug with screw connection|
|Switch on duration||S2 50%|
|Push force (N.)||150|
|Pull force (N.)||150|
|Holding force (N.)||250|
|Max. opening/closing time (Sec.)||50|
|Sound level (1 mtr. distance)||< 70 dB|
|Temperature Resistance||300° C for 30 minutes (according to DIN EN 12101-2)|
|Temperature Range||-5 °C to +75 °C|
|Mounting method||Surface mount|
|Dimensions and Weights|
|Dimension (L x W x H)||546x35x90 mm.|
|Nett weight (kg.)||2.11|
|Certifications / Tests|
|Certifications & Declarations||EN 12101-2|
|Limit stop||Electronic | Integrated|
|Overload cutt-off||Electronic (load dependent) | Integrated|
|Color||EV1/F1 | RAL9016|