SCREW ANCHOR SS ø11x41xM6
Stainless steel screw anchor with M6 internal thread and a total length of 41mm. Especially suitable for use in aluminum profiles.
The profile should first be drilled (ø 11mm.). After this, the screwanchor can be fixed with a 6 mm Allen wrench in the profile.
Note: The screw anchors should always be fixed in at least two walls with a minimum of 1.6 mm thickness.
Can be used for the mounting hinges, doorhandles or other products on aluminum profiles.
Note: When using the screw anchors for e.g. mounting fall-trough protection or railings, always check the locally applicable regulations or standards. For safety reasons, a test or inspection may be required!