Accessories
Here you will find a wide range of accessories for completing your automation project.
If you are looking for a particular product or solution that you can not find in this category, please contact us. It is impossible to put all products and solutions online.
Subcategories:
Productcode manufacturer: K2-2001
Product code: T1535Z100
Set of 5 pieces SICO plugs. Used for all Simon-PROtec drives and locking actuators in PA version.Plug has 6 poles and is supplied with back cover lid with blind cover and pull relief for 3 wire, 6 wire and 2 x 3 wire cables...
€ 67.00
Productcode manufacturer: K2-2002
Product code: T1535Z101
Set of 5 pieces SICO plugs. Used for all Simon-PROtec drives and locking actuators in PA version.Attention: This only concerns the gray exterior of the plug! For complete SICO-Plugs, you must order the SICO-PLUG...
€ 41.00
Productcode manufacturer: K2-2003
Product code: T1535Z110
Connecting cable 6-wire, wire cross-section 0.5 mm² loose from the drum. Used for all Simon-PROtec drives and locking actuators in PA version.Core colors: brown, blue, white, green, black, gray Outer jacket color: silicone gray Tested for NSHEV use according to DIN EN 12101-2Attention: This cable is..
€ 5.00
Productcode manufacturer: K2-201x
Product code: T1535Z12x
Connecting cable 3x0,75 mm² complete with mounted SICO-Plug. Suitable for Simon-PROtec drives with SICO-plug connection when connected in solo and when not using the drive's potential-free contact. In all other cases, use the 6-core version of the SICO cable.Available in lengths of 3 and 5 metersCor..
Starting From € 26.00
Productcode manufacturer: K2-200x
Product code: T1535Z11x
Connection cable 6x0,50mm² complete with pre-mounted SICO-Plug. Used for all Simon-PROtec drives and locking actuators with SICO-Plug connection.
(All Simon-Protec products with the type number starting with PA are suitable for connection via the SICO plug)Available in lengths of 3 and 5 metersCo..
Starting From € 30.00
Productcode manufacturer: 42017U
Product code: T1568Z101
Connecting cable 5-wire complete with mounted plug on 1 side. This cable is used to connect the NANO-SYNCHRO chain actuator to the controller board.Standard length 1.5 mtr. Other lengths are available on request.Outer jacket color: blackTested for N-SHEV use according to DIN EN 12101-2Attention: Thi..
€ 22.75
Productcode manufacturer: 42019W
Product code: T1568Z102
Connecting cable 5-wire complete with mounted plug on 2 sides. This cable is used to connect NANO-SYNCHRO chain actuator together.Standard length 1.0 mtr. Other lengths are available on request.Outer jacket color: blackTested for NSHEV use according to DIN EN 12101-2Attention: This cable includes a ..
€ 29.65
Showing 1 to 7 of 7 (1 Pages)