CHAIN ACTUATOR EKA20
230 Volt AC Chain actuator with a fixed stroke of 118 | 213 | 308 | 403 or 498 mm. Max. push/pull force is 200N.
Suitable on windows and vents for daily ventilation purposes. The actuator has an die-cast zinc housing and the push/pull chain is made of stainless steel.
This actuator is widely applicable on side hung, top hung, bottom hung and casement windows.
Because of the small dimensions also applicable for concealed installation in wood, PVC and aluminium windows (depending on the profile cross-section!).
Less suitable for skylight because of the limited pushforce.
Comes complete WITH sash brackets, but WITHOUT other mounting brackets or other accessories because of the wide range of different types of them. These must be ordered separately.
|Field of application||Natural Ventilation|
|Current Nominal (A.)||0.12|
|Cable||4x 0.75 mm2 / L= 2 mtr.|
|Switch on duration||S2 20%|
|Stroke (mm.)||118 | 213 | 308 | 403 | 498|
|Push force (N.)||100 | 200|
|Pull force (N.)||200|
|Holding force (N.)||3000|
|Temperature Range||0 °C to +70 °C|
|Dimensions and Weights|
|Dimension (L x W x H)||442x28x36 mm.|
|Certifications / Tests|
|Certifications & Declarations||EN 60335-2-103:2015 | DIN EN 60335-1:2012-10|
|Limit stop||Close: Electronic | Open: Mech. limit switch | Integrated|
|Overload cutt-off||Electronic (load dependent) | Integrated|
|Material||Housing: Die-Cast Zinc, painted. Chain: Stainless Steel|
|Color||RAL9006 | RAL9016|