Search

The SHEV emergency button type HE080 is used as a main or secondary SHEV-button (in accordance with DIN 18232/2 and LBO) in smoke and heat extraction systems (SHEV). In case of fire, HE080 is triggered manually and activates the SHEV system.The HE080 is equipped with 3 indicator LEDs: Red..

The SHEV emergency button type HE081 is used as a main or secondary SHEV-button (in accordance with DIN 18232/2 and LBO) in smoke and heat extraction systems (SHEV). In case of fire, HE081 is triggered manually and activates the SHEV system.The HE081 is equipped with 1 indicator LED: Red =..

The SHEV emergency button type HE082 is used as a main or secondary SHEV-button (in accordance with DIN 18232/2 and LBO) in smoke and heat extraction systems (SHEV). In case of fire, HE080 is triggered manually and activates the SHEV system.The HE080 is equipped with 3 indicator LEDs: Re..

The optical smoke detector RM-3000 works on the scattered light principle. A light transmitter and receiver are mounted in the plastic housing. The light beam does not hit the receiver in normal condition. As soon as smoke particles are detected in the air between the transmitter and receiver, the l..

The thermal detector TH-4860 contains two thermal sensors that can detect fire at an early stage and thus quickly give an alarm message to an SHEV system and/or a fire alarm panel.A thermal detector can alternatively be used in rooms where a smoke detector is less suitable and can therefore give a f..

The wind-rain detector WTS-892 is designed for connection to SHE and ventilation control panels of SIMON PROtec. The wind detector (anemometer) measures the wind that blows past the turbine and compares the measured values with the set values. When the windforce exceeds a preset value, the connect..

Thermostat TH is used as an internal temperature-dependent automatic release for ventilation purposes in SHE and ventilation systems. This thermostat is a two-position controller and switches with a change-over contact at the set threshold. The continuous signal is returned and evaluated b..

The pushbutton DT/AP/W is a water-resistant (IP44) manual release for ventilation purposes. It is suitable for surface mounting and is equipped with two buttons and two closers, which lock each other.The DT/AP/W pushbutton is a single-pole venting pushbutton, it is equipped with two rocker switc..