CHAIN ACTUATOR QUASAR-L
Chain actuator QUASAR-L is available in both a 24V DC and a 230V AC version. The L version has a fixed, non-adjustable stroke of 600/750 or 1000mm. and a maximum push/pull force of 300N. Applicable to windows and vents for natural ventilation. The 24 Volt DC version complies with EN12101-2 and is therefore also suitable for use in natural smoke and heat extraction (N-RWA) systems.
The QUASAR-L has an extruded aluminium housing die-cast aluminum housing (69x37mm.) which is standard available anodised in EV1/F1. On request also available in white or black.
This chain actuator is standard equipped with an automatic 0-point detection in closed position. This eliminates the need for mechanical adjustment.
The start position, end position and overload protection are electronically controlled.
- SYNCHRO version - For use of several motors (max. 4 units) on 1 wing.
- F-Contact - For feedback signal in both open and closed position, for example to control an extra bolt or hardware drive.
The standard version is supplied including a fixed connection cable of 3 mtr. The number of wires depends on the chosen version!
The mounting brackets must be ordered separately. (Model depends on the situation / profile and application)
|Field of application||(N)SHEV | Natural Ventilation|
|Voltage||24V DC | 230V AC|
|Current Nominal (A.)||0.9 (24V DC version) | 0.2 (230V AC version)|
|Cable||included / L= 3 mtr.|
|Cable connection||Fixed cable|
|Switch on duration||S2 50%|
|Stroke (mm.)||600 | 750 | 1000|
|Push force (N.)||300 (stroke 600) | 100 (stroke 750) | 0 (stroke 1000)|
|Pull force (N.)||300|
|Holding force (N.)||3500|
|Temperature Range||-5 °C to +70 °C|
|Dimensions and Weights|
|Dimension (L x W x H)||759/834/959x69x37 mm.|
|Limit stop||Electronic | Integrated|
|Overload cutt-off||Electronic (load dependent) | Integrated|